AURO WATER FILTRATION SYSTEM
How to use the Auro Water Filtration System:
Download the Auro Water Filtration User Guide or follow the steps below:
Once you have washed all of the components of your Auro Water Filtration System and assembled per instructions:
1. Start filling the upper chamber with water.
2. While filling, add the appropriate amount of Auro Water Purifying Solution to the water.
3. The water will filter through the Micro Ceramic Filter and 4-Layer Earth Filter into the bottom chamber and be ready to drink in a short while. Enjoy!
Cleaning the Auro Water Filtration System
Upper Chamber: Simply remove the upper portion of your water system, unscrew and remove the ceramic filter. Wash the inside and outside of the upper chamber with a non-abrasive sponge. Clean with a mild detergent and rinse well.
Lower Chamber: Once the upper chamber is removed, remove the plate which has the 4-Layer Earth Filter attached. Remove the chamber from pedestal and follow the same process as the upper chamber.
Spigot: Simply hold the spigot in place with one hand and unscrew the inside portion. Rinse well with hot water. Gently wash with a tiny brush if you like.
At Auro, it is important to us that you understand our products, and know how to properly use and care for them. Please contact us if you can’t find the answers to your questions. For product-specific questions, please visit our FAQ’s.
Auro Water Filtration System
Auro Water Purifying Solution
If the water source is believed to be extremely contaminated by known or unknown toxic substances, proper laboratory analysis will be required for accurate dilution rates.